Unloaders

"L" shaped Balanced Pressure Regulator. Brass, 2000 PSI, 3/8" FPT Inlet x Outlet.
Stainless steel seat and piston, 7 GPM. No minimum bypass required. 200˚F max temp.

KOTHAR Pressure Regulator, SS, 2175 PSI. 3/4" F Inlet & Outlet, 1" Bypass, 175° F Max, 9.25 GPM. Spring operated w/adjusting bolt & lock nut. SS Body w/PEEK internal components. Will maintain full system pressure when idling.

Unloader Valve, No knob, 4500 PSI max. Pressure, (2) 3/8" F bypass, Trapped Pressure. #PULSAR4HP

K7.3 Brass Flow Sensitive Balanced Unloader, 6.6 to 10.8 GPM, 3500 PSI Max, 3/8"-19 BSPP-F Inlet & By-Pass, 3/8"-19 BSPP-M Outlet, 165° Temp

K7.2 Unloader Brass Flow Sensitive Balanced Unloader, 4.2 to 6.6 GPM, 3500 PSI Max, 3/8"-19 BSPP-F Inlet & By-Pass, 3/8"-19 BSPP-M Outlet, 165° Temp

K7.1 Unloader Brass Flow Sensitive Balanced Unloader, 2.9 to 4.2 GPM, 3500 PSI Max, 3/8"-19 BSPP-F Inlet & By-Pass, 3/8"-19 BSPP-M Outlet, 165° Temp

Unloader For CAT Pumps, 35 GPM, ..2000 PSI, Inlet & Outlet Port Size 3/4" NPTF

Dial Set Pressure Regulator. 3/4" FNPT (Inlet x Outlet) w/Internal Strainer and Union Fittings. Two 1/4" FNPT Gauge Ports. Dial adjusts in 10 PSI increments. PSI ranges: 25-90 PSI. 33° to 140° F Temperature Range.

YVB8KMS Unloader w/Micro Switch Unloader for Karcher Pressure Washer 8 GPM at 3650 PSI VB8 w/Switch (Normally Closed)

VB8 Trapped Pressure Unloader 3200 PSI 8 GPM 3/8" BSPM Inlet 3/8" BSPF Outlet and By-Pass 195deg F

Brass Pressure Regulator w/Adjustable Valve. 8 GPM max, 3600 PSI, 3/8" NPTF (Inlet & Outlet), , 1/4" By-Pass. 176 deg F max Temp.

Trapped Pressure Unloader 2175 PSI 52 GPM 1" NPT(F) Inlet Outlet and By-Pass Ports

Trapped Pressure Unloader Green Spring Stainless Steel Fittings 21.0 GPM max 4500 PSI 1/2" FNPT Inlet(2)/Outlet/By-pass(2) 200

Rebuild Kit for YU5221 Unloader

Unloader 6.25 GPM 3200 PSI

High Pressure Unloader / Balanced Relief Valve 6.3 GPM 2450 PSI 195deg F Inlet(2) and Outlet (1) 3/8-19 BSPP-F Buna-N Seal 3/8"

Blue Spring Trapped Pressure Unloader Valve 4050 PSI max 10.5 Gpm max (2) 3/8” NPTF Inlet and 3/8” NPTF Outlet Pulsar4KHP 3/8"

Unloader 5650 PSI 10.5 GPM 3/8"F Inlet (1) x Outlet (2)