Sprockets

1-1/4DIA X 20 ST Gear for Saber Kondor FreeStyler

Sprocket Drive Motor

Sprocket with 15 Teeth, for 50 Chain. Uses H style bushings.

H40H19 Bushed Roller Chain Sprocket. Single Strand, Split Taper, Hardened Steel. 40 Chain, 1/2" Pitch, 19 Teeth.

H40H18 Bushed Roller Chain Sprocket. Single Strand, Split Taper, Hardened Steel. 40 Chain, 1/2" Pitch, 18 Teeth.

Double Strand Bushed Roller Chain Sprocket. Uses Split Taper Bushing (H). 40 Chain, 19 Teeth (No Hardened Teeth); 3.292" OD; 1/2" Pitch; Steel. DS40H19

Sprocket for 60 Chain, 17 Teeth. Uses 1610 Bushing.

Roller Chain Idler Sprocket for 40 Chain. 18 Teeth, Type C Hub. .05" Pitch, 5/8" Bore Diameter, 3.14" OD, 0.284 Bore Width. Ball bearings are double-sealed and pre-lubricated.

H40H16 Bushed Roller Chain Sprocket. Single Strand, Split Taper, Hardened Steel. 40 Chain, 1/2" Pitch, 16 Teeth.

Bushed Roller Chain Sprocket. Single Strand, Split Taper, Hardened Steel. 40 Chain, 1/2" Pitch, 15 Teeth. Uses H Bushing.

Single Strand Finished Bore Sprocket w/Keyway and Set Screw. 15 Teeth, 1/2" Pitch, 1" Bore Diameter - Type B Hub Style, 2.6250" OD, Hardened Teeth. Use w/40 Chain.

Sprocket 18 Teeth, 40 Chain.

17 Tooth Finished Bore Sprocket with 1/4" x 1/8" Keyway for use with single strand of 40 chain. 5/16-18 x 5/16" Set screws included. Keyway is on center of tooth. 2.970 OD, 1.25 Bore Diameter x 1" Bore Length, .50" Pitch, Type B Hub (2-1/4" OD). Steel

Taper Bushed Sprocket, 17 Teeth, for 50 Chain. Uses H Bushing.

Taper Bushed Sprocket,15 Teeth for 60 Chain. Used on Tower (Right Angle 3-Way Gearbox). Uses 1610 Bushing.

60BTB14H Roller Chain Sprocket for Tower Drive Shaft Taper Bushed Type B Hub Single Strand 60 Chain Size for 1210 Bushing 0.75" Pitch 14 Teeth 1.25" Max Bore Dia 3.736" OD 2.5938" Hub Dia 0.459" Width

Sprocket for Tower Motor Gear Box. 60 Chain, 13 Teeth.
Uses 1210 Bushing.

501- 8TBH Taper Roller, Chain Sprocket for 50 Chain. 18 Teeth, 4.1875" OD 1" Length Rated for 3600 RPM Max. Hub Coupling. Uses 1610 bushings.